Share this page

Food Dehydrator with DDS (Dual Drying System)

Food Dehydrator with DDS (Dual Drying System)

KIHARA WORKS Co., Ltd.

Amazingly Impressing Drying
Technology Developed by
KIHARA WORKS
               
        
D DS (Dual Drying System) is the name of innovative food drying technology we have independently developed and put into practical use. Two sensors are installed in a dehydrator to detect the dry-bulb temperature and wet-bulb temperature and control the relative humidity inside the dehydrator. The technology allows producing the best quality of dried foods and providing drastic energy saving effect by maintaining the optimum temperature and humidity environment for the dehydrating.
                                                             Fig. 1 Food Dehydrator: F30 series

Major Features and Advantages

DDS (Dual Drying System)
・Allows outcome with vivid color and good flavor.
・Allows drastic energy saving (fuel consumption: Up to 70% lower than conventional products).
・One button operation allows full-automation to produce the best quality of dried foods regardless of the operator’s 
   knowledge and experience.
・Hardly affected by outside air; allows producing uniform quality dried foods in a fixed time.
・Applicable to drying medicinal plants, which require the change of content’s nature upon the drying.

                                                 Fig. 2 Dry-bulb & Wed-bulb thermometer, Water tank

                                                                 Fig. 3 Operation panel: CPC-35

                                                                    Fig. 4 Kerosene burner: ST-E

KIHARA WORKS Co., Ltd. is the leading company for manufacturing dehydrators with the history since 1902, its top level art technology in Japan proved by numerous awards including national awards.

Technology Data

Possible applications

DDS (Dual Drying System) is the name of innovative food dehydrating technology we have independently developed and put into practical use. Two sensors are installed in a dehydrator to detect the dry-bulb temperature and wet-bulb temperature and control the relative humidity inside the dehydrator. The technology allows producing the best quality dried foods and providing drastic energy saving effect by maintaining the optimum temperature and humidity environment for the drying.

By drying, the storage period of agriculture, forestry and fishery products can be extended. In addition, user benefits such as reduced transportation costs due to weight reduction and higher added value due to processing can be created. Dry processing is a technology that has low initial investment costs and is easy to use even in developing countries where cold chains are not in place. By utilizing our technology, we can contribute to reducing the waste rate of agriculture, forestry and fishery products and improving income in developing countries.  

Competitive advantage

  1. Product Price (except various expenses such as transportation and installation costs):
    ・For DDS dehydrator: Between about 1.5 and 8.0 million JPY (SM / F / FS series per unit, depends on model)
    ・For conventional dehydrator: Between about 1.3 and 7.8 million JPY
     
  2. Running Cost (reference value in Japan. Processing amount and fuel cost vary depending on model and dry matter) :
    For DDS Dehydrator (SM Series): About 100 to 1,200 JPY (for electricity per drying in case of Shiitake mushroom)
    ・Since there is no model for comparison with the SM series, comparison is not possible
    For DDS dehydrator (F/FS Series): About 1,500 to 6,000 JPY ( for kerosene per drying in case of Shiitake mushroom)
    For conventional dehydrator: About 5,000 to 20,000 JPY (for kerosene per drying in case of Shiitake mushroom)

                     Fig. 5 Comparison of drying system between KIHARA’s product and a conventional dryer

Performance

DDS has been shown to reduce fuel consumption by 70% when compared to the conventional dehydrating technology in drying shiitake mushroom.

Kerosene consumption in conventional technology 100L → in DDS technology 30L in case of using F30
(Pre-dried fresh shiitake weight 250kg, Dried shiitake weight after drying 37.5kg = Yield rate 15%, 0.8L / kg dried matter, Drying time 24H)

・Kerosene consumption in DDS dehydrator F30 23L
(Pre-dried fresh apple weight 150kg, Dried apple weight after 22.4kg = Yield rate 15%, 1.03L / kg dried matter, Drying time 20H)

Technical maturity / Past record of introduction

DDS was originally developed to dehydrate leaf tobacco and has been used for 150,000 units for about 40 years.
The SM / F / FS series has sold over 2,000 units in 10 years.
Technical training results are as follows
  2017 Kyrgyzstan,
Mozambique
  2018 Russia, Mozambique, Zambia
  2019 Russia, Thailand

・Overseas product adoption results within 10 years are as follows
  Russia, Thailand, Sri Lanka, Indonesia, Korea, China, Laos, Vietnam

  DDS (Dual Drying System) has received the following awards:
・”The Energy-Efficient Machinery Award” by The Japan Machinery Federation
・”The Monodzukuri Nippon Grand Award” under the Prime Minister of Japan’s award system
・”Science and Technology Masterpiece Award” given by the Minister of Education, Culture, Sports, Science and Technology
・”Leaping 300 small and medium sized Enterprises” by the Minister of Economy, Trade and Industry

Information on patent related to this technology

N/A

Company Data

Name KIHARA WORKS Co., Ltd.
Address 3106-1, Aio-nishi, Yamaguchi-City, Yamaguchi Prefecture, 754-1102, JAPAN
Capital 45 million JPY (as of 24th October, 2019)
Contact person

Mr. Toshimasa KIHARA (EXECUTIVE DIRECTOR)
toshimasa-kihara@kiharaworks.com
Phone: +81-83-984-2211
Corporate website: http://www.kiharaworks.com/about/about_en.html

Number of employees 70 (as of 24th October, 2019)
Date of company foundation 13th February, 1951
The type of business

Manufacturing, Sales and R&D

                  

International operation

Number of employees for international operation 
10
Overseas offices
City, Country Name of Company
(if applicable)
N/A N/A

Modality of business transaction

Partnership
We would like to conclude a basic contract with a local partner company to entrust the sales, installation and maintenance of our products.
We conduct technical training for local partner companies at the head office in Yamaguchi Prefecture. We will teach you how to operate, install and maintain the products.

Attachments

Schematic illustration of the technology

・English product catalogs and technical commentary movie will be sent upon request
F series and SM series are EAC certified

※EAC (Eurasian Conformity) Mark is a certification mark to indicate products that conform to all technical regulations of the Eurasian Customs Union.

 

Contact Person(s)

Mr. Toshimasa KIHARAE-mail: toshimasa-kihara@kiharaworks.com

*Please mention that you saw UNIDO's website when making the first contact with the company.

Registered Category

  • Agribusiness Technologies : Food value chain