Share this page

Renewable energy: Micro Hydraulic Power Unit (Spiral Type Pico-Hydro Unit “PicoPica10”, “PicoPica500”)

Renewable energy: Micro Hydraulic Power Unit (Spiral Type Pico-Hydro Unit “PicoPica10”, “PicoPica500”)

Sumino Co., LTD

Micro Hydraulic Power Unit for Electricity Generation in Small-scale, Low-head Environments


(Video: "Ultra-Small Water Power Generator"
featured on Japan Video Topics sponsored by Ministry of Foreign Affairs of Japan)

Spiral PicoPica Hydraulic Power Unit is a promising pico-hydro power generation equipment which has potential for dissemination in non-electrified areas, with its characteristics including low-head generation and dust-resistance. There are two types of units, “PicoPica10” and “PicoPica500”

“PicoPica10” is a unit that enables around 10W generation by securing a flow of 10ℓ/sec and a head of 0.1m. This product can be manually assembled and utilized as security lighting, drawing power from a nearby waterway. “PicoPica10” has already been sold over 500 sets within Japan as an environmental education material.

On the other hand, “PicoPica500” enables around 500W generation by securing a higher flowrate of 100ℓ/sec and a head of 0.7m. The generated energy can be equivalent to an average Japanese household’s electricity consumption.

If this product is implemented in developing countries where electrification is an issue, people’s lifestyle can be modernized, resulting in providing enormous social and cultural impact.

Major Features and Advantages

I. Low Head Generation

This product can generate electricity with lower head compared to other hydraulic power generation units.

II. Dust Resistance

Besides having an open-type and simple structure for easy installation, the spiral shape of the watermill prevents the unit to be clogged with floating substances or dusts.

Technology Data

Possible Applications

 “PicoPica10”
-Weight: 17.5kg
-Installation method: To set on waterway by more than 2 persons
– Material for environmental education
– Simple security lighting 

 “PicoPica500”
 -Weight: 250kg(Excluding installation frame)
 -Installation method: To set it on waterway by crane trucks. Thereafter, fix it on waterway with anchor bolts.
-Night time lighting for studying or working
-Power for refrigerators for preserving food and medicine, telecommunication equipment such as cellular phone, and television.

                  

        Photo1. PicoPica10                                Photo2.PicoPica500

Please kindly refer to the following page/document.
・Sumino’s website for PicoPica series: http://suminoseisakusho.jp/saisei_Eng.html
・PicoPica10 Brochure: http://suminoseisakusho.jp/image/pico_panf_eng.pdf
・Specification: http://suminoseisakusho.jp/image/picopica_Specification_English.pdf

Competitive Advantage

    This product allows you to generate with lower head compared to other hydraulic power generation units. As the whole structure of this watermill is open-type and simple, works such as assembly, installation, cleaning, and maintenance can be completed with ease. Besides, the spiral shape watermill prevents the unit to be clogged with floating substances or dusts.

    Because this product doesn’t require large waterways or pressure tubes for installation and there are not many component parts, this product is cost-effective compared to another hydraulic generation units. When installed, the frame and the main body create a head by damming the waterway.

    So this product can be installed and operated smoothly as long as the waterway ensures required flow for generation. Regarding main consumables (such as bearing, generator, and watermill turbine) that require maintenance, no special skill will be needed to exchange them. Consequently, troubles can be repaired promptly.

    Performance

    • PicoPica10 enables around 10W generation by securing a flow of 10ℓ/sec and a head of 0.1m.
    • PicoPica500 enables around 500W generation by securing a flow of 100ℓ/sec and a head of 0.7m.
    • Power generated by PicoPica500 adapts to various voltage/frequency through using a transformer.

    Technical maturity / Past record of introduction

    Since 2011 to date, we have sold around 500 sets of PicoPica10, spiral type pico-hydro generation unit, within Japan.
    PicoPica500 was released on December 2017 and it has already been placed in Nikko City, Tochigi Prefecture, Japan. Sales expansion will be further promoted.

    Information on patent related to this technology

    PAT.5845498

    Company Data

    Name

    Sumino Co., LTD

    Address

    1074-15,Kusumi,Osashima Town, Ena City, Gifu Prefecture

    Capital

    JPY 5,000,000 as of December, 2018

    Contact person

    Person in Charge: Mr. Masaya SUMINO
    Email: s_info@suminoseisakusho.jp
    Contact Number:+81-90-2139-8179
                              +81-573-25-2788

    Number of employees 13, as of December 2018
    Date of company foundation March 17th, 1989
    Type of business

    Manufacture of Transportation Equipment

     

    International operation

    Number of employees for international operation 

    2

         Overseas
           offices
    City, Country Name of Company (if applicable)
    Yangon, Myanmar KAWABATA SUMINO LIMITED

     

    Modality of business transaction

    Partnership

    Initially, products will be imported from Japan and a local partner shall bear responsibility for maintenance work.

    Next, we would like to export only main components like water mill and ask a local partner for gathering commodity items and assembly work.

    By applying Japanese products to core parts like the watermill and generator, we can assure Japan quality products to be manufactured within a developing country.

    Attachments

    Schematic illustration of the technology

    Contact Person(s)

    Mr. Masaya SuminoE-mail: s_info@suminoseisakusho.jp

    *Please mention that you saw UNIDO's website when making the first contact with the company.

    Registered Category

    • Energy Technologies : Renewable energy