Small-Type Medical Waste Incinerator
Featuring a low running cost and easy maintenance, Stella Environment Corporation’s Radiation Gas-Burning Small-Type Medical Waste Incinerator is ideal for areas where the energy supply is not stable or even available. It is an efficient small-type incinerator with chimney-top structure with the following characteristics:
• Low concentration of dioxin emissions in compliance with Japanese (Dioxin) Emission Standards
• Extremely safe to operate
• Easy to deposit waste
• Low fuel consumption
• Easy maintenance
• Solar powered
• Highly efficient
• Compact design
The incinerator is able to burn 5kg max (wet waste 40%) per one-hour cycle at 800-900˚C. The burning capacity will vary depending on the materials that are contained in the waste batch.
Major Features and Advantages
I. Low Fuel Consumption
It is highly efficient, consuming only 7L of diesel oil/hour/cycle or 5kgs of wood per cycle. In addition, it can function on either gas oil or biomass fuel. No other incinerators can offer these options for temperatures of more than 800℃ with a residual gas burning time over two seconds.
II. Easy Waste Depositing/High Operational Safety
This machine is easy to use by anyone with minimal training. Waste deposits are quick and operations are extremely safe. And, with such efficient operation, there is a decrease in the cost associated with running it due to low energy consumption and ease of use. Technical guidance is given to workers to learn how to use the machine.
III. Solar-Powered Unit
Because this equipment is solar-powered, it can be used in areas where the energy supply is unstable. Energy produced by sunlight can be stored in the machine for later use – much like solar panels on a home.
IV. Affordable Running Cost
Featuring a low cost of operation, Stella’s Radiation Gas-Burning Small-Type Medical Waste Incinerator only costs $2.5/cycle and $3750 for the year with wood and $10.5/cycle and $15,700/year for oil.
V. Easy Maintenance
The main body of the incinerator comes with very little maintenance requirements. In fact, just four components (Disposal Box, Buffer Plate, Burner Chip and Temperature Sensor) must be changed every four years.
VI. Small and Efficient
Despite its small size, Stella’s incinerator is highly efficient and produces a high output.
Stella Environment Corporation’s Radiation Gas-Burning Small-Type Medical Waste Incinerator has been tested in Micronesia, Cambodia, and the Democratic Republic of Congo. It is most effective in areas that don’t have access to electricity but do have access to plenty of sunlight. It is vital in waste management and adequate waste separation.
The features of the small-type incinerator with chimney-top structure are as follows.
- Low concentration of dioxin emissions that complies with Japanese (Dioxin) Emission Standards.
- Easy waste depositing / High operational safety
- Functions on gas oil or biomass fuel. Low fuel consumption.
- Solar-powered electricity accessory which enables the operation even in areas where energy supply is not stable.
Note: This comparison chart is solely based on in-house estimates.
Characteristics of STELLA’s incinerator:
- Low running cost
- Easy maintenance of the main body. Only 4 parts (Disposal Box, Buffer Plate, Burner Chip, & Temperature Sensor) need to be changed every 4 years.
- Choice of fuel (Diesel Oil or Biomass) – no other incinerators support these options while maintaining over 800℃ temperatures and residual time of burning gas over 2 seconds.
- Small but highly efficient.
5kg max (wet waste 40%) / 1 hour cycle / 800-900˚C (depending on the materials contained in the waste batch).
Diesel oil – 7L / hour / cycle
Biomass – approx. 5kgs of wood / cycle
Technical maturity / Past record of introduction
The past sales records are as follows:
2007 Tonga 3 units
2007 Tuvalu 1 unit
2007 Vanuatu 2 units
2008 Solomon Islands 1 unit
2009 Fiji 3 units
2010 Cambodia 26 units
2010 Kiribati 1 unit
2010 Laos 1 unit
2015 Micronesia 2 units
2016 Democratic Republic of Congo 1 unit
Micronesia Memorial Hospital, Kosrae
Kean Svay Referral Hospital
Democratic Republic of Congo
Lubumbashi University Hospital
Information on patent related to this technology
Japan Patent no. 4755158 for “Small-type Incinerator with Chimney-top Structure” (Registered on June 3, 2011)
|Name||STELLA ENVIRONMENT CORPORATION|
|Address||COURTYARD HIROO 3A 4-21-2 Nishiazabu, Minato-ku, Tokyo 106-0031 JAPAN|
|Contact person||Mr. Takuya Ikeda / Mr. Hisatoshi Shimase TEL: +81 3 6805 0734 / +81 3 5468 5463 E-mail: firstname.lastname@example.org / email@example.com|
|Number of employees||7|
|Date of company foundation||June, 2005|
|The type of business||
Modality of business transaction
In Cambodia, we partnered with Europ Continents and delivered a locally manufactured model in February 2015. We are working to develop such business models in other countries, to make costs competitive, and improve maintenance support.
*Please mention that you saw UNIDO's website when making the first contact with the company.
- Environmental Technologies : Waste treatment and management